Operation Manual

DTX-1500 CableAnalyzer
Users Manual
40
Memory Functions
All DTX testers have internal memory that can store at
least 250 Autotest results, including graphical data. The
maximum capacity of internal memory depends on the
space taken by the tester’s software.
Viewing Results
To view saved results, do the following:
1 Turn the rotary switch to SPECIAL FUNCTIONS; then
select View/Delete Results.
2 If necessary, press  Change Folder to find the
result you want to view.
3 Highlight the result; then press .
Deleting Results
To delete results or folders, do the following:
1 Turn the rotary switch to SPECIAL FUNCTIONS, then
select View/Delete Results.
2 If necessary, press  Change Folder to find the
results you want to delete.
3 Do one of the following:
 To delete one result, highlight it, press  Delete,
press  Delete; then press  Yes.
 To delete all results in the current folder, the
current folder, or all results in the tester (internal
memory), press
 Delete; then select an option.
Press  Delete; then press  Yes.
Uploading Results to a PC
To upload results to a PC, do the following:
1 Install the latest version of LinkWare software on your
PC.
2 Turn on the tester.
3 Connect the tester to the PC with the USB cable
included or the DTX serial cable available from Fluke
Networks.
4 Start LinkWare software on the PC.
5 Click Import on the LinkWare toolbar. Select the
tester’s model from the list.
6 Select the records you want to import; then click OK.