Operation Manual

Certifying Coaxial Cabling
33
Table 3. Coaxial Cable Test Settings (cont.)
Setting Description
Standard:
The tester displays and saves plot data for insertion loss. The tester saves data for
the frequency range required by the selected test limit.
Extended: The
tester saves data beyond the frequency range required by the selected test
limit.
No: Plot
data is not saved, which lets you save more results. Saved results show only worst
margins and worst values for each pair.
The tester must be referenced to the smart remote the first time the two units are used
together. You should also set the reference every 30 days. See “Setting the Reference for
Coaxial Cabling” on page 30.
See “Preparing to Save Tests” on page 17.
SETUP > Instrument
Settings > Stor
e Plot
Data
SPECIAL FUNCTIONS >
Set Reference
Settings for saving
tests