Operation Manual

Certifying Twisted Pair Cabling
27
Autotest Summary Results for Twisted Pair Cabling
Figure 14 describes the Autotest Summary screen.
Figure 14. Autotest Summary for Twisted Pair Cabling
AMD77F.EPS
 PASS: All parameters are within limits.
FAIL: One or more parameters exceed the limit.
PASS*/FAIL*: One or more parameters are within the tester’s
accuracy uncertainty range, and the “*” notation is required by
the selected test standard. See “PASS*/FAIL* Results” on page 28.
 Press  or  to scroll the screen.
 If the test failed, press  for diagnostic information.
 Action prompt for the screen. Use   to highlight a
parameter; then press .
 : The test passed.
: The parameter was measured, but has no PASS/FAIL limit in the
selected test limit.
X: The test failed.
: See “PASS*/FAIL* Results” on page 28.
 The worst margin found for the test.