Operation Manual

DTX-1500 CableAnalyzer

Users Manual

Table 2. Twisted Pair Test Settings (cont.)

PASS*/FAIL Only: The tester shows HDTDX and HDTDR results only for Autotests with PASS*,

IL*, or FAIL results.

All AUTOTESTs: The tester shows HDTDX and HDTDR for all Autotests.

Select Enable to test cabling through an unpowered mid-span PoE (Power over Ethernet)

device. See the Technical Reference Handbook for details.

Standard: The tester displays and saves plot data for frequency-based tests such as NEXT,

return loss, and attenuation. The tester saves data for the frequency range required by the

selected test limit.

Extended: The tester saves data beyond the frequency range required by

the selected test

limit.

No: Plot data

is not saved, which lets you save more results. Saved results show worst margins

and worst values for each pair.

The tester must be referenced to the smart remote the first time the two units are used

together. You should also set the reference every 30 days. See “Setting the Reference for

Twisted Pair Cabling” on page 18.

Settings for saving

tests

See “Preparing to Save Tests” on page 17.

Setting Description

SETU

P > Twisted Pair >

HDTDX/HDTDR

SETUP > Twisted Pair >

AC Wir

e Map

SETUP > Instrument

Settings > Store Plot

Data

SPECIAL FUNCTIONS >

Set Refer

ence