Operation Manual

Preparing to Save Tests
17
Preparing to Save Tests
 Check the memory space available:
Turn the rotary switch to SPECIAL FUNCTIONS; then
select Memory Status.
 Select a cable ID source:
You can select IDs from a pre-generated list or create an
ID after each test. Turn the rotary switch to SETUP, select
Instrument Settings, select Cable ID Source; then select a
source. See “Cable ID Options” on page 39 for details.
 Set up a job folder:
On the Instrument Settings menu: Current Folder: Select
an existing folder or press 
 Create Folder to create a new folder.
 Set the plot data storage option:
On the Instrument Settings menu select Store Plot Data.
Select Standard to save plot data for the frequency range
required by the selected test limit. Select Extended to
save data beyond the range required by the selected test
limit. Select No to save data in text format only, which
lets you save more results.
 Enter job information:
On the Instrument Settings menu press
 to show the
tab with the Operator, Site, and Company names. To
enter a new name, select a setting, press
 Create
if necessary; then use the softkeys,  

, and  for editing. Press  when you are
finished.
 Enable Auto Save, if desired:
On the Instrument Settings menu press
 to show the
tab with the Auto Save Results setting. Select Yes to
have the tester automatically save Autotests using the
next ID available from the Cable ID Source.