Operation Manual

Getting Acquainted
9
Figure 2. Tester Side and Top Panel Features (cont.)
 Connector for twisted pair interface adapters.
 Cover for the module bay. Leave the cover in place.
 Bail.


USB ( ) and RS-232C ( ): Ports for uploading
test reports to a PC and updating the tester’s software.
The RS-232C port uses a custom DTX cable available
from Fluke Networks.
 Headset jack for talk mode.
 Connector for the ac adapter. The LED turns on when
the tester is connected to ac power.
 Red: Battery is charging.
 Green: Battery is charged.
 Flashing red: Charge timeout. The battery failed to
reach full charge within 6 hours. See “Powering the
Tester” on page 12.