Operation Manual

Chapter 1: Get Acquainted

The Home Screen for the DSX CableAnalyzer

 Shows a summary of the test results in the project:

: The number of tests that passed.

: The number of tests that failed.

: The number of tests with an overall marginal result.

 The test setup panel shows the settings the tester will use when

you tap TEST or press . To change these settings, tap the

panel.

Note

You can set up tests for any module that the

tester can use, even when no module is attached.

 Icons show the status of the Store Plot Data and AC Wire Map

settings. See Table 2 on page 33.

 Next ID: The Next ID panel shows the ID that the tester gives to

the next test results you save.

Tap Next ID to do these tasks:

 Enter an ID, select a different ID in the ID set, select a

different set of IDs, or make a new set. The tester adds the

IDs and ID sets you make to the project that shows on the

home screen.

 Turn Auto Save on or off.

 Operator: The name of the person who does the job. You can

enter a maximum of 20 operator names.

 TOOLS: The TOOLS menu lets you set the reference, see the

status of the tester, and set user preferences such as the

language and the display brightness.

 RESULTS: Tap RESULTS to see and manage the results that are

saved in the tester.

 TEST: Tap TEST to do the test shown in the test setup panel.

riešenia na presné meranie

http://www.elso.sk