Operation Manual

Chapter 5: Maintenance
Update the Software
71
To see information about a remote tester
Use DSX CableAnalyzer modules and adapters to connect the
main and remote testers together (see Figure 5 on page 17), then
tap REMOTE on the Version Information screen.
Update the Software
New software gives you access to new features and the latest test
limits and cable types. Software updates are available on the
Fluke Networks website.
You can use a PC to install a software update, or connect an
updated main unit to a remote or to another main unit to update
those units.
To use a PC to update the software
Caution
To prevent unexpected loss of power, connect the
ac adapter to the tester when you update the
software.
Note
The software update procedure does not delete
the test records, project settings, or user
preferences in the tester, but can possibly change
the factory-installed cable types or test limits.
1 Install the latest version of LinkWare software on your PC.
LinkWare is available on the Fluke Networks website.
2 Download the Versiv update file from the Fluke Networks
website, or contact Fluke Networks to get the update by
other methods. Save the file to your hard drive.
3 Connect the AC adapter to the tester and connect the
Micro-AB USB port on the tester to a USB port on the PC. See
Figure 26.
riešenia na presné meranie
http://www.elso.sk