Operation Manual

DSX CableAnalyzer
Users Manual
14
 The percentage of the project that is completed. The percentage
is the number of IDs used for saved results divided by the total
number of used and available IDs in the project. The number of
IDs includes IDs for copper and fiber cable.
% Tested does not show if your project contains only a Next ID
list. See “About Next ID Sets” on page 63 for more information
about the Next ID list.
 The type of module attached to the main Versiv unit.
 This icon shows when the tester’s link interface adapter is
connected to the adapter on a Versiv remote and the remote is
turned on.
 This icon shows when the talk function is on. To use the talk
function:
1 Connect the main and remote testers together through a
link that has one or more good wire pairs.
2 Connect headsets to the headset jacks on the testers
3 Press the button on one of the headset microphones or
press  on the remote, then speak into the
microphone.
riešenia na presné meranie
http://www.elso.sk