Operation Manual

DSX CableAnalyzer
Users Manual
2
Safety Information
Table1 shows the international electrical symbols used on the
tester or in this manual. Symbols for certifications and compliance
are on page 78.
: This key turns the tester on and off.
Warning
To prevent possible fire, electric shock, or personal
injury:
 Do not connect the tester to telephony inputs,
systems, or equipment, including ISDN inputs.
Doing so is a misapplication of this product, which
could result in damage to the tester and create a
potential shock hazard to the user.
 Use only AC adapters approved by Fluke Networks
for use with the tester to supply power to the tester
and charge the battery.
 Do not put the battery pack in a fire or an
environment with temperatures more than 140 °F
(60 °C).
 Do not use the tester in damp or wet environments.
 Do not short-circuit or disassemble the battery pack.
Table 1. International Electrical Symbols

Warning: Risk of fire, electric shock, or personal injury.

Warning or Caution: Risk of damage or destruction to equipment
or software. See explanations in the manuals.

Do not connect this equipment to public communications networks,
such as telephone systems.

Do not put products containing circuit boards into the garbage.
Dispose of circuit boards in accordance with local regulations.
riešenia na presné meranie
http://www.elso.sk