User Manual

CableIQ Qualification Tester
Users Manual
50
Using the IntelliTone Cable Map
Function
The tester’s IntelliTone functions also work with an IP200
probe’s cable map function to verify wiring.
To use the toner and an IP200 IntelliTone probe’s cable
map function:
1 Connect the tester and probe to twisted pair cabling
as shown in Figure 21.
2 Turn the tester’s rotary switch to TONE.
3 Use
D to highlight the one-note or two-note
IntelliTone selection.
4 The probe’s LEDs light in sequence to indicate the
cable’s wiring. See the probe’s documentation for
details.
avv56f.eps
Figure 21. Using the Toner with the IP200 IntelliTone
Cable Map Function