User Manual

CableIQ Qualification Tester
Users Manual
46
Using Multiple Remote ID Locators in Discover
Mode (MultiMap
™
)
In Discover mode you can use multiple remote ID locators
to quickly verify the wiremaps of multiple telephone
cables connected in a star or bus topology. When you
connect the tester at the distribution center, the
MultiMap screen shows all of the wiremaps (Figure 18).
Figure 19 shows how to connect the tester and remote ID
locators for the MultiMap function.
avv09f.eps
A Wiremaps for the remote ID locators or wiremap adapter detected.
Note
Split pairs may not be detected if they are not in the
cable segment connected directly to the tester at the
bridge tap.
B To see details about a wiremap, use B C to select a wiremap; then
press J M.
Figure 18. MultiMap Results