User Manual

CableIQ Qualification Tester

Users Manual

avv20.bmp

avv19.eps

Crossed wires.

Detection requires a far-end adapter.

Split pair. Continuity from end to end is correct, but is made with the

wrong wires.

Note

Cables with untwisted pairs, such as telephone cords,

typically show split pairs due to excessive crosstalk. Because

this crosstalk does not affect voice signals, the split pair

warning does not cause a Telco wiremap test to fail.

Note

If the tester detects multiple faults that produce the warning symbol (

W), only the highest-

priority fault is displayed. The priority for these faults (highest to lowest) is split pair, bridge tap,

and A/B crossover cable.

-continued-

Figure 10. Typical Wiremap Screens (cont.)