User Manual

1
CableIQ Qualification Tester
Overview of Features
The CableIQ
™
Qualification Tester is a hand-held tester
that lets you test wiring and qualify the transmission
capabilities of twisted pair and 75 Ω coaxial cabling
installations.
The tester offers the following features:
• Autotest function qualifies cabling for Ethernet,
telephone, or CATV service in less than 4 seconds.
• Identifies wiremap faults, bridge taps, and port
characteristics.
• Discover mode automatically reports cable
characteristics and tells you if the cable is connected
to a device.
• Detects and displays the strength of RF coaxial
television signals.
• MultiMap
™
function tests multiple segments through
bridge taps and detects faults on individual
conductors.
• Detects Ethernet service on twisted pair cabling and
television service on coaxial cabling.
• Locates crosstalk faults on twisted pair cabling and
impedance faults on twisted pair and coaxial cabling.
• IntelliTone
™
function works with Fluke Networks
ITK100 or ITK200 probes to help you locate and
isolate cables behind walls, at patch panels, or in
bundles. Toner function also works with standard
analog probes.
• Continuity toner simplifies testing of security
switches at doors and windows.
• Blinks the port light on a hub or switch to help you
verify connectivity and cable routing.
• Speaker test lets you quickly verify speaker
connections.