User Guide
Table Of Contents
- CableIQ Getting Started Guide
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Accessing the Users Manual
- Safety
- Controls
- Setting User Preferences
- Editing Text
- Connecting for Cabling Tests
- Results Icons
- Discovering Cabling Characteristics
- Qualifying Cabling with the Autotest
- Using the Toner
- Blinking a Port Light
- Testing for Continuity
- Using the Continuity Toner
- Locating Crosstalk and Impedance Faults
- Testing Speaker Cabling
- Replacing the Batteries
- Contacting Fluke Networks
CableIQ Getting Started Guide
6
Discovering Cabling Characteristics
Discover mode lets you quickly check wiremaps,
measure length, and determine if cabling is connected
to a network port, video device, or telephone.
Turn the rotary switch to DISCOVER, then connect to
twisted pair or 75 coaxial cabling with or without a
wiremap adapter at the far end. Results from Discover
mode cannot be saved.
Discover Mode on Twisted Pair Cabling
AXY46
Discover Mode on a Bridge Tap
AXY49