User Manual
Table Of Contents
- CableIQ™ Qualification Tester Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Table of Contents
- List of Figures
- List of Tables
- Overview of Features
- Registration
- Contacting Fluke Networks
- Additional Resources for Cable Testing Information
- Unpacking
- Symbols and Safety Information
- Physical Features
- Using the Wiremap Adapter and Remote ID Locators
- Powering the Tester
- Verifying Operation
- Setting User Preferences
- Checking the Hardware and Software Versions
- Qualifying Cabling with the Autotest
- Discovering Cabling Characteristics
- Using the Toner
- Using the IntelliTone Cable Map Function
- Blinking a Port Light
- Testing for Continuity
- Using the Continuity Toner
- Locating Crosstalk and Impedance Faults on Twisted Pair Cabling
- Testing Speaker Cabling
- Calibrating Length Measurements
- Memory Functions
- Maintenance
- If Something Seems Wrong
- Options and Accessories
- Specifications
- Appendix A: Diagnosing Cabling Faults
- Index
68
Specifications
Specifications apply at 23 °C (73 °F), unless otherwise noted.
EnvironmentalSpecifications
Operatingtemperature 32 °F to 104 °F (0 °C to 40 °C)
Storagetemperature -4 °F to +140 °F (-20 °C to +60 °C)
Operatingrelativehumidity(%RH
withoutcondensation)
90 % (50 °F to 95 °F; 10 °C to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C)
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test with and without wire map adapter attached
Safety EN 61010-1:2001
Altitude 4,000 m; Storage: 12,000 m
EMC EN 61326-1:Portable
CableIQQualificationTester
UsersManual