Brochure

CableIQ: See network
infrastructure problems
quickly
• Isolate cabling problems from network
problems. Save time and money
by escalating fewer trouble tickets.
• See existing cabling bandwidth.
Four-second test quickly determines
if your existing cabling can support
voice/10/100, VoIP or Gigabit Ethernet.
• Troubleshoot cabling performance faults.
Determine why the existing cabling plant
cannot support the desired network speed
(e.g. connection fault at 7 feet).
• Free up 10% or more of your switch
ports. Discover what is at the far end of
any cable, whether it is an open cable,
a PC, an analog phone, or switch.
•
Detect speed/duplex mismatches in a
matter of seconds. Determine a PC’s duplex
settings and compare settings to the con-
nected switch – all from one location.
•
Isolate faults easier with intelligent
wiremap. Test for wiremap, length, shorts,
split pairs or opens, and graphically see
the distance to specific pin faults, such as
“pin 1 break at 37 feet.”
•
Locate cables and wires with superior
accuracy. Breakthrough IntelliTone™ digital
signaling technology precisely locates cables
in even the most chaotic wiring closet.
•
Empower frontline techs with an easy-to-
use tool. Intuitive user interface and
graphical display guides users with little
or no training required.
• Avoid disputes over cause of network
problems. Save results or upload them
to a PC with Cable I
Q Reporter So
ftwar
e
(included).
CableIQ is the first cabling tool designed
f
or network technicians who need to trou-
bleshoot and qualify cabling bandwidth.
It gives even the most novice tech vision
to see what speeds existing cabling can
support, quickly isolate cabling from
network problems, and discover what is
at the far end of any cable. That means
network techs can close trouble tickets faster,
reduce on-call time, and save money by
better utilizing their existing infrastructure.
Reduce escalated problems
by as much as 30%
CableIQ’s powerful troubleshooting
capability and intuitive interface enable
frontline technicians to identify and
troubleshoot a wider range of infrastructure
problems. Is the port active? Are the duplex
settings matched? Is it a network problem
or a cable problem? Can the cable support
the required network bandwidth? CableIQ
is the only tool that can answer all these
questions before trouble tickets are
escalated to the next level.
Troubleshoot cabling faults
in half the time
CableIQ shows you whether your cabling is
qualified to support the network’s required
ban
d
wi
d
th, an
d pr
ovi
des detailed informa-
tion on the nature and location of cabling
performance faults. Intelligent wiremap
graphically displays the cable‘s wiring
configuration, and shows the distance to
opens and shorts. Advanced diagnostics
also identifies and locates non-wiremap
related connection faults, such as crosstalk
or large impedance changes. Built-in
IntelliTone digital technology allows you to
tone and trace without disconnecting from
the network. With CableIQ, your techs can
close trouble tickets faster by cutting cable
troubleshooting time in half.
Ensure a smooth transition to
VoIP or Gigabit Ethernet
When you deploy Voice over IP (VoIP)
or Gigabit Ethernet, you want to make sure
the existing cabling will support the band-
width requirements of your new equipment.
Your cabling was certified, but moves adds
and changes have rendered many links
incapable of running desired speeds.
CableIQ quickly reveals whether a link,
including patch cords, is qualified for voice,
10/100BASE-T, VoIP, or Gig. Knowing your
cabling‘s bandwidth capabilities before
upgr
adin
g can pr
even
t coun
tless hours of
future downtime and labor hours wasted
on unn
ecessary tr
oubleshooting.
CableIQ gives network techs new
vision into cabling bandwidth
switch
F1 F2
EXIT TEST
ENTER
F1 F2
EXIT TEST
ENTER
computer
open
analog ph
one
security camer
a/
vid
eo
10
100
1000
Gig
Mbps
cab
ling ba
ndw
idt
h