Quick Start Guide

10
AirCheck Getting Started Guide
Can Devices Connect to the Wireless Network?
Use the tester to verify connectivity.
 Can a device connect as a client to the network
(SSID)?
Select Networks, highlight a network, then press
 Connect.
Note
To connect to a secure network, the tester must
have a profile that includes security credentials.
 Can a device connect to an access point (BSSID)?
Select Access Points, highlight an access point, then
press
 Connect. If an * is on the right of
Connect, this indicates security has not been
configured on the tester for that network. Press
Connect* and you are guided through entering
the security settings. When done, it is saved to the
current profile. Press Tools, then Manage profiles
/ network passwords to re-edit the security
settings if needed.
 If a device cannot connect to a network or access
point, where does the connection procedure fail?
Look at the connection log. Press
 Log from the
Connect to Network or Connect to Access Point
screen.
 Can a device ping a network device?
Do a ping test. Connect to a network or access
point, then press
 Start tests.