Instructions

Chapter 4: Manage Test Results
View Saved Results
71
: The number of DSX CableAnalyzer results that have PASS*
results. PASS* results have measurements within the range of
accuracy uncertainty for the tester. See “PASS*/FAIL* Results” on
page 42.
 The cable IDs that have FAIL results and must be tested again.
 The cable IDs that have an overall PASS or result.
 Tap VIEW ALL to see a summary of the results in all the projects
in the tester.
 TRANSFER lets you export or import results to or from a flash
drive and delete results on the flash drive. The TRANSFER
function also lets you sync project setups and results with
LinkWare Live.
 MANAGE lets you move results to a different project, rename
results, or delete results that are in the tester.
 The scroll bar shows when the list of results is long. To use the
scroll bar, tap on the bar or slide your fingertip on the bar. For
example, to see the 12th result in the list, tap on “12” in the
scroll bar. When you slide your fingertip on the bar, the number
of the result you can see is next to your fingertip.
 Tap the ID/Date control to sort the results by cable ID or by date.
When you sort by ID, the results show in ascending order. When
you sort by date, the latest result is at the top of the list.
 These icons show when you connect the tester to a network
to use Fluke Networks cloud services (see Chapter 6):
The tester is connected to a wireless network.
The tester is connected to a wired network.
 The asset management icon shows when the owner of a
LinkWare Live account has enabled the asset management
service on the tester. See “About the Asset Management Service”
on page 93.