Datasheet

Toner and Probe shared features:
IntelliTone digital technology with advanced signal processing provides high-resolution measurement
Auto-Off feature: The toner turns off automatically after 2.5 hours of inactivity. Probe turns off after 1 hour of inactivity
SmartTone™ analog technology: IntelliTone Pro Toners generate four different analog songs which alternate every time the pair
under test is shorted; IntelliTone Pro Probes detect this tone or any other analog signal from other testers
Battery status: 3-level battery status indicator LEDs on the toner and probe light for one second at power on
Specifications
General
Operating temperature 32° F to 104° F (0° C to 40° C)
Storage temperature -4° F to +140° F (-20° C to +60° C)
Operating relative humidity
(% RH without condensation)
95% (50° F to 95° F; 10° C to 35° C)
75% (95° F to 104° F; 35° C to 40° C)
Uncontrolled < 50° F (< 10° C)
Vibration Random, 2 g, 5 Hz – 500 Hz
Shock 1 m drop test with and without module
Safety IEC 61010 Category: None
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications
Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor
control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks.
Toner
Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display LED
Control Thumbwheel switch
Toner interface
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling, Banana jack plugs
(2) – two conductor wiring
Toner frequency IntelliTone signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs
Output power 5 V p-p
Auto power down Turns off automatically after 2.5 hours of inactivity
4 of 5