Datasheet

Identify and troubleshoot cable services
Service – Is the RJ45 jack a datacom jack, or a dead jack? IntelliTone Pro 200 LAN Toner LEDs clearly identify common datacom
services found on today's networks including 10/100/Gigabit Ethernet links.
Continuity – Once you’ve located a cable, the next step is to verify cable conductor continuity. IntelliTone Pro 200 LAN Toners
make it easy – eliminating the need for a separate diagnostic tool.
200 LAN Toner
1. IntelliTone provides robust toning into active network equipment while
eliminating cable misidentification due to bleed
2. Banana jacks allow you to use only the leads you need and facilitates easy
replacement
3. Test cable continuity, eliminating need for separate diagnostic tool
4. Test cable continuity, eliminating need for separate diagnostic tool
5. Precisely isolate wire pairs with built-in SmartTone analog toning
6. Tone active networks safely and effectively with IntelliTone digital mode
7. Identify resistance and if digital tone or analog tone function is operational
8. Identify and diagnose Ethernet link connectivity with NIC/hub indication
9. Cable termination indicator identifies if cable is connected or not
10. Knob provides simple, task oriented operation
200 Probe
1. Multiple-level LEDs simplify signal interpretation in noisy environments. Visually steps through wiremap tests
2. SYNC indicates detection of IntellTone signal and shows battery status at power-up
Choose between two digital detection modes:
3. Digital detection mode: lets you locate cables at a distance
4. Digital detection mode: lets you isolate cables in bundles or at patch panels
5. Analog mode used to isolate individual wire pairs with SmartTone
6. Test cable continuity – eliminating need for separate diagnostic tool
7. Time-saving thumbwheel lets you select desired toning mode on the probe rather than toner
8. Plug works with CableMap function – eliminating the need for a separate wiremap tool
3 of 5