Datasheet

Locate hidden cables
One of the toughest, most time-consuming parts of locating a cable has been in
tracing its path amidst multiple cables and bundles in wiring closets. The IntelliTone
digital signal features a LOCATE tone that provides maximum radiation, allowing you
to quickly locate hidden and hard-to-find cabling.
Isolate the right cable or pair – fast
Cabling installations have become increasingly complex, which has made cabling
increasingly difficult to locate with traditional technologies.
When cables are run together for even short lengths, a signal from one can bleed
over to another. One cable might carry the original signal; other cables might carry the
signal as a result of bleed. Isolating cables with traditional tools requires guesswork,
training, time for repeated testing – and even the best efforts often result in mistakes.
IntelliTone Pro provides two cutting-edge technologies to isolate cables or wire pairs.
Digital mode can be used to isolate twisted-pair cables on a switch or within a bundle.
SmartTone™ analog mode can be used to isolate wire pairs at an unterminated
outlet.
Overcome noise – and save hours of time
Fluorescent lights, machinery, computer monitors and electrical wiring all produce
noise that slows down cable location. Together, the IntelliTone Pro Toner’s
synchronized digital signal and the IntelliTone Pro Probe’s microprocessor controlled
signal identification technology reject noise and false signals to clearly identify cable
location. This can save you hours every week on cable location projects.
Tone on live networks safely and effectively
Modern network devices use common mode termination for cables connected to their ports. This reduces noise and crosstalk in the
cable; but, it can also absorb a traditional toner signal. Unlike traditional signals, the IntelliTone digital signal stays strong despite
common mode termination. And the IntelliTone Pro 200 LAN Toner automates toning individual cable conductors, making it quick,
efficient and safe to locate cables on active networks
Tone on live networks safely and effectively
Modern network devices use common mode termination for cables connected to their ports. This reduces noise and crosstalk in the
cable; but, it can also absorb a traditional toner signal. Unlike traditional signals, the IntelliTone digital signal stays strong despite
common mode termination. And the IntelliTone Pro 200 LAN Toner automates toning individual cable conductors, making it quick,
efficient and safe to locate cables on active networks.
Verify conductor continuity with cablemap
Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone™ Pro 200 LAN.
The IntelliTone Pro 200 Probe features a Cablemap capability that identifies common cable miswires in twisted pair cabling.
IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate
miswires.
2 of 5