Information

Features
Pro3000 Capability
Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the
wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the
cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair.
SmartTone provides five distinct tones for exact pair identification.
Tone Generator features:
 SmartTone technology
 Send tone signal up to 10 miles on most cables
 Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data
jacks without adapters
 External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
 Continuity testing
 Line polarity confirmation
Pro3000 Design
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone
easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from
accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy
environments.
Probe features:
 Loud large speaker amplifies tone through walls, enclosure, wood or plaster
 Easy-to-use adjustable volume control dial
 “Quick-twist” tip for easy replacement
 Free spare tip inside Pro3000 Tone and Probe Kit