User Manual
Table Of Contents
- PRO3000 Users Guide
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- Introduction
- Safety Information
- Installing Batteries
- The PRO3000 Probe
- The PRO3000 Toner
- Tracing Cables
- Tracing Pairs
- SmartTone Positive Identification
- Checking Polarity
- Checking Continuity
- Using the RJ11 Modular Plug
- In-House Communications (Talk Battery)
- Replacement Parts and Accessories
- Registration
- Contacting Fluke Networks
- Specifications
15
Specifications
Specifications
P
RO
3000 Toner
User Interface
Slide switch selects continuity or tone mode
Button selects continuous, alternating, or off
Tone mode LED
Continuity/polarity LED
Frequency
Continuous: 1000 Hz nominal
Alternating: 1000 Hz/1500 Hz nominal
Over Voltage
Protection
60 Vdc in Toner/Polarity Mode
Output Power in
Tone Mode
8 dbm into 600 Ω
Output Voltage in
Continuity Mode
8 Vdc with fresh battery
Battery
9 V alkaline
Temperature
Operating: -20 °C to +60 °C
Storage: -40 °C to +70 °C
Dimensions
2.7 in x 2.4 in x 1.4 in
(6.9 cm x 6.1 cm x 3.6 cm)
Certifications and
Compliance
Conformité Européenne. Conforms to
relevant European Union directives.
CAN/CSA-C22.2 No. 60950-1-03
CAN/CSA-C22.2 No. 1010.1-92 + CSA-
C22.2 No. 1010.1B-97, UL/ANSI 3111-1