User Manual

Power Logger

Before You Start

Magnet Hanger Kit

The accessory shown in Figure 3 is used to:

• Hang the Logger with power supply attached (use two

magnets)

• Hang the Logger separately (use two magnets)

• Hang the power supply separately (use one magnet)

Voltage Test Leads

Voltage test leads are four-core, flat, test leads that do not

tangle and can be installed in tight spaces. On installations

where the access to Neutral is out of reach with the three-

phase test lead, use the black test lead to extend the

Neutral lead.

For single phase measurements use the red and black test

leads.

hcf058.eps

Figure 3. Magnet Hanger Kit