User's Manual

Performance Series Thermal Imagers
Before You Start
11
Control Buttons
The function and cursor buttons are the primary controls.
These buttons move the cursor through the menu structure
to set the features.
Controls and Adjustments
• User-selectable temperature scale
• Language/localization selection
• Time and date settings
• Emissivity selection
• Reflected background temperature compensation
• Transmission correction
• User-selectable hot spot and cold spot, and center
point on the image
• Expand/contract measurement box with
MIN-AVG-MAX
• Color alarms
• User-selectable backlight setting
• Graphic information display (selectable)
In general, push:
1 to set the change and go back to the live view.
 to set the change and go back to the previous
menu.
 to cancel the change and go back to the live view.
ZYXW to move the cursor and highlight an
option.
In live Manual Mode, the arrow buttons are always active
to adjust Level and Span.
Memory
Push  to go directly to the preview images of stored
files. See page 29 for more information about the Memory
feature.
 Warning
To prevent eye damage and personal injury, do
not look into the laser. Do not point the laser
directly at persons or animals or indirectly off
reflective surfaces.
The laser warning symbol () shows in the Header zone
of the display when the laser is turned on and you pull the
secondary trigger.