User's Manual
Table Of Contents
- TiS10, TiS20, TiS40, TiS45, TiS50, TiS55, TiS60, TiS65 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Accessories
- SmartView Software
- Before You Start
- Image Capture
- Micro SD Memory Card
- Temperature Measurement
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Performance Series Thermal Imagers
Before You Start
7
On-Imager AC Power Socket
1. Connect the ac power adapter into an ac wall outlet
and connect the dc output to the Imager’s external
power socket. , flashes on the display while the
battery charges with the ac power adapter.
2. Charge until the charge indicator on the display does
not flash.
3. Disconnect ac power adapter when the smart battery
is fully charged.
Note
Make sure that the Imager is near room
temperature before you connect it to the charger.
See the charging temperature specification. Do
not charge in hot or cold areas. When you charge
the battery in extreme temperatures, battery
capacity may be decreased.
shows in the lower left-hand corner of the display
when the Imager is connected to external power and the
battery is removed. When the Imager’s power is off and
the ac power adapter is connected, , flashes in the
center of the display to show that the battery charge is in
process.
Keep the Imager attached to the charger until the , icon
shows a full charge. If you remove the Imager from the
charger before a full charge shows, it may have a reduced
run-time.
Note
When the battery is connected to ac power or the
unit is in video mode, the Sleep Mode/Auto Off
feature is disabled automatically.
Optional 12 V Vehicle Charger
1. Connect the 12 V adapter into the 12 V accessory
socket of the vehicle.
2. Connect the output to the external power socket of the
Imager.
3. Charge until the indicator until the , icon shows a
full charge on the screen.
4. Disconnect the 12 V adapter and Imager when battery
is fully charged.
Caution
To prevent damage to the Imager, remove the
Imager from the 12 V vehicle charger before
you start or jump start the vehicle.