User's Manual
Table Of Contents
- TiX520, TiX560 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Accessories
- Before You Start
- Image Capture
- Micro SD Memory Card
- Temperature Measurement
- SmartView Software
- Menus
- Remote Control
- Maintenance
- General Specifications
- Detailed Specifications
Expert Series Thermal Imager
Menus
35
Auto Off
The Auto Off timer is user-defined separately for the LCD
and power.
Note
Auto Off is automatically disabled when the
Imager is connected to ac power.
To set the Auto Off feature:
1. Go to Settings > Auto Off.
2. Push
/
to highlight LCD Time Out or Power Off.
3. Push
/
to set the timer between 1 minute and
120 minutes.
4. Push to set.
Localization
The Imager has several settings for localization:
• Date
• Time
• Language
• Decimal Separator
Date
The date can be displayed in one of two formats:
MM/DD/YY or DD/MM/YY.
To set the date:
1. Go to Settings > Date.
2. Push
/
to highlight the date format.
3. Push to set a new format.
4. Push
/
to highlight Set Date.
5. Push to open the Set Date menu.
6. Push
/
to select highlight day, month, or year.
7. Push
/
to change the settings.
8. Push to set the date and exit the menu.
Time
To set the time:
1. Go to Settings > Time.
Time displays in two different formats: 24 hour or 12
hour. To set the time format:
2. Push
/
to highlight time format.
3. Push to select.
4. Highlight Set Time.
5. Push to open the Set Time menu.