User's Manual
Table Of Contents
- TiX520, TiX560 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Accessories
- Before You Start
- Image Capture
- Micro SD Memory Card
- Temperature Measurement
- SmartView Software
- Menus
- Remote Control
- Maintenance
- General Specifications
- Detailed Specifications
TiX520, TiX560
Users Manual
20
SmartView
Software
SmartView
®
software is supplied with the Imager or and is
available for free download at
www.fluke.com/smartviewdownload. This software is
intended for Fluke Imagers and contains features to
analyze images, organize data and information, and make
professional reports. SmartView allows audio annotations
and photos from the IR-PhotoNotes™ annotation system
to be reviewed on a PC. SmartView is used to export IR
and visible images as .jpeg, .jpg, .jpe, .jfif, .bmp, .gif, .dib,
.png, .tif, or .tiff formatted files.
SmartView Mobile Software is also available for flexibility
away from your PC or in the field.
Menus
The menus are the access points for thermal image
display, camera features, memory setup, and settings for
date, time, language, units, file format, and Imager
information.
Measurement Menu
The Measurement Menu has settings for the calculation
and display of radiometric temperature measurement data
related to the thermal images. These settings include the
Temperature Range selection, Level/Span adjustment,
Emissivity, Background, Transmission, Spot
Temperatures, Center Box, and Markers.
Range
Preset measurement ranges and a Full Automatic Range
are available on the Imager. To select the range:
1. Go to Measurement > Range.
2. Push / to select between the preset ranges
or the full automatic range.
3. Push to set the range.