User's Manual

1750

Operators Manual

Assign Recorder Name and Password

Use this feature to assign a name identifier to the Recorder and to establish a password

for the Recorder. This naming feature is designed to help you keep track of which

Recorder is in use.

Using Phase Swap

Rather than having to change the physical connections to the power system, use the Phase

Swap feature to make a software-selectable correction without physically switching the

cable. You can select from the following:

• Swap any voltage input

• Swap any current input

• Invert any current input clamp

The screen shows check boxes to invert any current probe. Current probes are directional,

and selecting “invert” has the effect of removing the probe and turning it around.

If the power type is delta, V phases are AB, BC, and CA (L1L2, L2L3, L3L1 is available

as an optional setting). If the power type is Wye, V phases are AN, BN, CN, and NG. (N

= neutral, G = ground).