User's Manual

Operators Manual
Downloading Data and Erasing Memory
35
The Memory Card Full message appears for 5 seconds, followed by the screen below.
You can also access the download menu by selecting Data > Recorder SD Memory.
You can delete files as necessary, and when satisfied that there is room on the card,
proceed to write the selected internal Recorder memory data to the SD card.
Fluke Power View
11:35
Data View Setup
ok
Stored files:
File Name Date Size
*larson BLDG -SN12345
SD CARD FILES
When there is room on the card, a message confirming the download will appear.
You can also tap the Erase Recorder Memory from the Data menu option, and tap the
Erase All button to erase all power quality data stored in the Recorder. Recorder memory
is typically erased after power quality data has been saved on the SD card, although you
can leave old data in Recorder memory. It will be overwritten automatically when you
start your next Recorder session, so it never has an adverse effect on recorded data
quality or quantity.