User's Manual

Operators Manual
Downloading Data and Erasing Memory
33
When the password is accepted, the Home screen appears.
Note
A screen to set up password protection for a Recorder is provided in the
Setup menu.
Downloading Data and Erasing Memory
Use the Data menu options to manage the Recorder memory and download recorded data
to the SD card. You are downloading recorded data from the flash memory to an SD card
in the Recorder. When you want to use that data, you must move the card to the PDA.
You can later copy the data to your PC for review using the Power Analyze software. Tap
1750 Internal Memory to view the Download screen.
The Download screen shows a three-phase rms V strip chart with date and timescale
shown. This is the data in the Recorder internal memory. The default settings of the start
and stop times is everything in memory, to download ALL, tap the Write to SD button.
The gray cursor lines right and left with triangular arrowheads at the bottom of the screen
show the start and stop times currently selected for download. Green and red flags are
START and STOP mark annotations inserted during the recording session. Yellow flags
are file name annotations inserted during the recording session.