User's Manual
Table Of Contents
- 233 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Hazardous Voltage
- Test Lead Alert
- Features
- Error Messages
- Battery Saver™(Sleep Mode)
- MIN MAX AVG Record Mode
- Display Hold
- Manual and Autoranging
- Backlight
- Power-Up Options
- How to Make Measurements
- Remote Operation
- Maintenance
- Service and Parts
- General Specifications
- Detailed Specifications
233
Users Manual
32
To replace the batteries in the display module:
1. Remove the display module from the Meter base.
See the “Remove the Display” section.
2. Remove the battery door of the display module as
shown in Figure 10.
3. Remove the two AA batteries and replace them with
new ones. Use the correct battery orientation.
4. Replace the battery door on the display module.
Dock the display module with the Meter base and turn the
Meter on.
2
3
gcc111.eps
Figure 10. Display-Module Battery Removal