User's Manual
Table Of Contents
- 233 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Hazardous Voltage
- Test Lead Alert
- Features
- Error Messages
- Battery Saver™(Sleep Mode)
- MIN MAX AVG Record Mode
- Display Hold
- Manual and Autoranging
- Backlight
- Power-Up Options
- How to Make Measurements
- Remote Operation
- Maintenance
- Service and Parts
- General Specifications
- Detailed Specifications
233
Users Manual
6
Hazardous Voltage
When the Meter senses a voltage ≥30 V or a voltage
overload (), the symbol is shown on the display and
the red high-voltage LED on the Meter base illuminates to
tell you a hazardous voltage is at the Meter input. For
frequency measurements >1 kHz, the symbol and high-
voltage LED is unspecified.
Test Lead Alert
XWWarning
To prevent personal injury or damage to the
Meter do not make a measurement with a test
lead in an incorrect terminal.
To make sure that you have the test leads in the correct
terminals, briefly shows in the display and a beep
sounds when you move the function switch to or from an
A (Amps) position.