User Manual

Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
40
To get the best performance from the lithium-ion battery, use the guidelines
that follow:
• Do not store the Imager on the charger for more than 24 hours as reduced
battery life may result.
• Charge the Imager for a two-hour minimum at six-month intervals for
maximum battery life. Without use, the battery will self-discharge in
approximately six months. Batteries stored for long periods will need two
to ten charging cycles for full capacity.
• Always operate in the specified temperature range.
~ W Caution
Do not incinerate the Product and/or battery. Go to Fluke’s
website for recycling information.
General Specifications
Temperature
Operating ............................................................ -10 °C to 50 °C (14 °F to 122 °F)
Storage ................................................................ -20 °C to 50 °C (-4 °F to 122 °F)
without batteries
Charging .............................................................. 0 °C to 40 °C (32 °F to 104 °F)
Relative Humidity .................................................. 10 to 95 % non-condensing
Display .................................................................... Color LCD, 3.5″ diagonal (Portrait
orientation)
with Backlight (selectable high,
medium, low)
Controls and Adjustments
User-selectable Temperature Scale (°C/°F)
Center Point Temperature
Language Selection
Time and Date Settings
Emissivity Selection
Background (reflected) Compensation
Transmission Correction (all models except Ti100)
IR-Fusion
®
(all models except Ti100)
Color Palettes
Level and Span
User-selectable Display Graphics
User-selectable File Format (all models: .IS2, .JPG, .BMP / varies by model: .IS3, .AVI)
Cardinal Compass (all models except Ti100)
Laser Pointer (on/off) IEC 825/93 Class II, FDA LFR 1040.10 Class II
LED Torch (all models except Ti100)
IR-PhotoNotes™ (all models except Ti100)