User Manual
Table Of Contents
- Ti100, Ti110, Ti125, TiR110, TiR125 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Accessories
- Before You Start
- Features and Controls
- Focus
- Primary and Secondary Triggers
- How to Use the Control Buttons
- How to Use the Menus
- Image Capture
- SD Memory Card
- Temperature Measurement
- SmartView( Software
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
38
4. Push / to highlight Language.
5. Push or to view the menu.
6. Push or to change the setting.
7. Push to set a new language.
8. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
Imager Information
You can access information about the Imager from the Settings Menu. This
includes:
• Model
• Camera serial number
• Refresh rate
• Engine serial number
• Firmware version
• FPGA #
• Factory calibration date
• Production date
To display the Imager Info:
1. Push .
2. Push / to highlight Settings.
3. Push or to view the menu.
4. Push / to highlight Imager Info.
5. Push or to view the menu.
6. Push / to scroll through the menu.
7. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.