User Manual

Thermal Imagers
Menus
35
3. Push  or  to view the menu.
4. Push / to highlight File Format.
5. Push  or  to view the menu.
6. Push / to highlight an option.
7. Push  to set the option.
8. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
Images saved in the .is2 file format have the consolidation of all data into a
single file and are more flexible for analysis and modification in the included
SmartView software. This file format consolidates the infrared image,
radiometric temperature data, visible image, voice annotation, and
IR-PhotoNotes into one location.
For situations where a smaller file size with maximum resolution is needed and
modification is not, choose the .bmp file format. For the smallest file size
where modification is not needed and image quality and resolution are not as
important, choose the .jpg file format.
The .bmp and .jpg files can be emailed and then opened on most PC and MAC
systems without special software. These formats do not allow full analysis
capabilities or modification.
The .is2 file format can be emailed and then opened with SmartView Software.
This format has the maximum versatility. Visit the Fluke website or contact
Fluke to find out how to download SmartView analysis and reporting software
at no charge.
Auto Off
Auto Off is set as off or on. When set to on, the Imager goes into the Sleep
mode after 5 minutes of inactivity. After 20 minutes of inactivity the Imager
turns off.
Note
When the battery is connected to AC Power, or the unit is in video
mode, the Sleep Mode/Auto Off feature is automatically disabled.