User Manual

Thermal Imagers
Menus
31
7. During playback, push  or  for fast forward and rewind. Push
 to continue normal playback.
8. Push  to exit the playback mode.
Laser Pointer
The laser pointer is a sighting aid and is offset from the infrared camera. As a
result, it may not always represent the exact center of the infrared or visible
image.
The laser dot does not appear on an infrared-only image, but does on visible-
only or AutoBlend images. The laser dot cannot be seen in the visible channel
of the IR-Fusion image if obscured by the center point marker graphic.
The laser pointer selections are Trigger Laser, Trigger Torch, and Laser/Torch.
When set, pull the secondary trigger to turn on, release the secondary trigger to
turn off.
W* Warning
To prevent eye damage and personal injury, do not look into
the laser. Do not point laser directly at persons or animals or
indirectly off reflective surfaces.
To set:
1. Push .
2. Push / to highlight Camera.
3. Push  or  to view the menu.
4. Push / to highlight Laser/Torch.
5. Push  or  to view the menu.
6. Push / to highlight an option.
7. Push  to set the option.
8. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
The laser warning symbol (*) shows in the Header zone of the display when
the laser is turned on and you pull the secondary trigger.