User Manual
Table Of Contents
- Ti100, Ti110, Ti125, TiR110, TiR125 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Accessories
- Before You Start
- Features and Controls
- Focus
- Primary and Secondary Triggers
- How to Use the Control Buttons
- How to Use the Menus
- Image Capture
- SD Memory Card
- Temperature Measurement
- SmartView( Software
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
30
2. Push / to highlight Camera.
3. Push or to view the menu.
4. Push / to highlight Video.
5. Push or to view the menu.
6. Push / to highlight an option.
7. Push to set the option.
8. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
Video Recording
To record:
1. Pull the primary trigger to start recording. The r icon shows in the
upper left corner or the display and the recording time graphic at the
bottom of the display shows the remaining time.
2. Pull the primary trigger to pause recording. The p icon shows in the
upper left corner or the display.
3. Push to end the recording session.
4. Push to save the video file. The Imager displays the VIDEO
menu as a prompt to disable the feature or continue in the same mode.
Video Playback
To playback:
1. Push .
2.
Push / to highlight Memory.
3. Push to view the thumbnails of saved files.
4. Push to highlight a file for playback. All .avi files
show the k icon in the upper right corner of the thumbnail.
5. Push to set a file for playback.
6. Push to start the playback. The i icon shows in the upper left
corner of the display if an audio file is attached to the video file.