User Manual
Table Of Contents
- Ti100, Ti110, Ti125, TiR110, TiR125 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Accessories
- Before You Start
- Features and Controls
- Focus
- Primary and Secondary Triggers
- How to Use the Control Buttons
- How to Use the Menus
- Image Capture
- SD Memory Card
- Temperature Measurement
- SmartView( Software
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Thermal Imagers
Menus
27
To view the Color Alarm menu:
1. Push .
2. Push / to highlight Image.
3. Push or to view the menu.
4. Push / to highlight Color Alarm.
5. Push or to view the menu.
Set High-Temperature Color Alarm
To set a high-temperature color alarm:
1. From the Color Alarm menu, push / to highlight the option:
Set High Alarm.
2. Push to open the Color Alarm menu.
3. Push / to adjust the temperature setting.
4. Push:
• to set the change and go back to the live view.
• or to set change and go back to the previous menu.
• to cancel the change and go back to the live view
Set Low-Temperature/Dew Point Color Alarm
To set a low-temperature/dew point color alarm:
1. From the Color Alarm menu, push / to highlight Set Low
Alarm.
2. Push to open the Color Alarm menu.
3. Push / to adjust the temperature setting.
4. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
Outside/Inside Alarm
If you set values for the high-temperature color alarm and a low-temperature
color alarm, the Imager will have the options for inside or outside isotherm
color alarms.