User Manual

Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
10
How to Use the Control Buttons
Three function buttons (, , ) and four arrow buttons
(, , , and ) are the primary controls. These buttons move the
cursor through the menu structure to set the features.
Table 5 is an overview of the buttons and their actions. In live Manual Mode,
the arrow buttons are always active to adjust Level and Span.
Table 5. Overview of Controls
Button Button Label / Action
, Trigger Cancel
, Trigger Done (exit from Menu structure)
,  Select or OK
,  Back
,  Move cursor to highlight an option
,  Fast forward/rewind (video mode only)
How to Use the Menus
The menus, coupled with the three function buttons (, ,
) and arrow buttons, are the access for thermal image display, camera
features, memory review, and settings for date, time, language, units, file
format, and Imager information.
To open the primary menu, push  or . The primary menu shows
five secondary menus for Measurement, Image, Camera, Memory, and
Settings. The text above each function button (, , )
applies to that button throughout all menu screens.
Push  to open the primary menu and push / to cycle
through the secondary menus. Each secondary menu lists an options menu.
Push / to cycle through the options.
The primary, secondary, and option menus close 10 seconds after the last push
of a function button. The option selection menu stays open until you make the
selection, go up a menu level, or cancel the action.