User's Manual
Table Of Contents
- 3000 FC Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Hazardous Voltage
- Test Lead Alert
- Battery Saver
- Remote Operation
- MIN MAX AVG Record Mode
- Display Hold
- Yellow Button
- Display Backlight
- Manual and Auto Range
- Power-Up Options
- Features
- AC Zero Input Behavior of True-rms Meters
- Basic Measurements
- Maintenance
- Service and Parts
- Specifications
3000 FC
Users Manual
18
Volts/Hertz Ratio
The Product can show the ratio of volts to frequency of an
ac signal. Set the Product as shown in Figure 3 to show
Volts/Hertz ratio.
When the Product is set to the Volts/Hz function, the
voltage range is set to manual. If the voltage increases to
a value larger than the range, the Product shows OL in
the display. If the voltage drops to less than 5 % of the
range, the value shown in the display can be invalid. Set
the Product as shown in Figure 3 to measure volts/Hz.
Volts/Hz
Volt/Hzx 2
gxr011.eps
Figure 3. Volt/Hertz Ratio