User manual

Application Software
Upload / Download (2638A and 1586A)
To use the system security feature:
Click
on the Software toolbar. The System
Security Dialog is shown.
alg131s.bmp
Configure Web and Alarm Mail Settings
Use the Web and Alarm Mail Settings dialog to enter
Fluke DAQ web configuration information and to
configure the Software to send e-mail messages to report
alarm condition.
Use the Web Settings portion of the dialog to specify a
URL where scanned values from your 268XA device are
to be sent. Use the Alarm Mail Settings portion of the
dialog to configure the Software to automatically send e-
mail messages that report an alarm condition using the
Simple Mail Transfer Protocol (SMTP).
Note
To use the e-mail and web features, the PC
must be connected to a network supporting the
Transmission Control Protocol/Internet Protocol
(TCP/IP).
49