User manual

Fluke DAQ
Users Manual
Screen Terms
Because of the differences in instrument functionality and
setups accommodated within Fluke DAQ, various terms
and dialog boxes are shown with different instrument
setup and communication procedures depending on the
instrument selected in either configuration or
communication menus. The following is a list of terms
found on these setup pages:
2680A series and NetDAQ (2640A and 2645A) generally
have similar page dialogs as do the 1586A and 2638A
products.
The 1586A channel dialog pages accommodate the entry
of calibration coefficients for some specialized probe
selections within the range menu. For more information
on entering probe coefficients see the product manual.
The dialog box entries include:
IP Address or Com port
Enter the IP address or Com port of the device to be
added.
Verify Button
Click Verify to ping the device and verify that the IP
address or Com port is correct.
Configuration transfer (2686A and 2680A only)
Transfer configuration information from the PC to the
device or from a PC Card to a PC or the device. PC Card
operations are available only for the 2686A.
Description (2680A and NetDAQ)
Enter a meaningful description of the device. 35
characters maximum.
Temperature Units
Specify Celsius or Fahrenheit. This automatically selects
temperature units for all temperature measurements.
20