User manual

Fluke DAQ
Users Manual
Before you register the software, ensure you are
registering it on the computer that is to be used in your
application.
During the registration steps you are directed to a non-
Fluke website for the registration process. The target
computer does not need to be connected to a network for
this process.
To register the Software:
1. Go to All Programs>Fluke DAQ 6.0>Register.
2. Allow Publisher Unknown access by clicking Yes.
3. Select Softkey and click Check.
4. Copy the Site Code from the site code box.
5. Go to
http://www.indusoft.com/License-Activation-
Commercial sign in or register on this site and paste
the site code and activation key you receive from
Fluke into the appropriate boxes.
You will receive a return email with your site key.
6. Paste this number into the site key box and click
Authorize.
Save your site key to assist you with moving your license
to another computer at a later date.
If you have difficulty during this registration process,
contact Fluke at [e-mail]
.
Before Installation
If you have an earlier version of the Software, you must
uninstall it before a new version is installed. To save data
and configuration files from a previous version to use in a
new installation, copy the "config" folder or individual
configuration files that are in the Fluke DAQ folder, to
another folder on your computer.
The new version of the Software will convert these
configuration files for use with the new version.
Installation
To install the Software:
1. Run the Launch.exe command from the CD. The
installation program prompts for an installation
location and checks if there is enough free space on
the hard drive.
2. Click Next and wait for the installation to finish.
Program application files are loaded under the
Program Files folder on your C: drive. The default
location for your data and configuration files is C:
users>Public>Public documents>Fluke DAQ. The
location can be changed during installation.
3. The installation program makes a shortcut on the
desktop. Double-click the shortcut to start the
Software.
4