User manual

Introduction
Fluke DAQ Application Software (the Software) provides
a graphical user interface (GUI) to the Fluke family of
data acquisition products. Use the Software to:
• Configure device settings.
• Download/upload configuration to the devices.
• Send commands to and take readings from analog
DIO module.
• Monitor a devices on-line values and alarms.
• Plot trend charts, and retrieve historical trends,
alarms, and export data files in CSV format.
• View remotely from any browser.
Note
The Software supports the 2638A Hydra
Series III Net DAQ devices (2640A and 2645A) ,
1586A precision Temperature Scanner, and the
2680A and 2686A.
Caution
To prevent loss of data, do not remove the
PC card or USB memory device while the
storage LED is on. Before the card is
removed, stop the device scanning. Loss of
power while data is stored can also result in
loss of data.
1