Datasheet

4 Fluke Corporation Fluke DAQ 6.0 Application Software for Fluke data acquisition products
OPC server software
OPC is a standard interface for
passing data and communicating
information between programs
and devices in the Windows
environment.
Fluke DAQ 6.0 software
contains our OPC server soft-
ware that loads with the Fluke
DAQ installation. This powerful
communication interface serves
up requested data to any OPC
client package, such as the Fluke
Trend Link advanced trending
software by Canary Labs.
When using the included
OPC software, client programs
such as National Instruments
LabVIEW™, Canary Labs Trend
Link, Wonderware
®
software
and many others may request
real-time or historical data from
the Fluke DAQ database.
Having an OPC server within
Fluke DAQ 6.0 means expanded
utility for your data handling
needs.
Trend Link
Trend Link is an advanced
trending and analysis software
from Canary Labs that can be
used to chart information in real
time from the Fluke DAQ (2680A-
APSW) program or other OPC
server sources.
Trend Link, using OPC,
requests data from the Fluke
DAQ software. This data is then
trended on a custom developed
chart produced by the user.
Trend Link has full control
over chart features, allowing you
to change scaling, super-impose
trends, change chart direction,
set visual alarms and much
more.
Trend Link (2680A-904) gives
an important visual dimension
to your data with a tremendous
amount of flexibility.
Trend Link features
• Multiple trend and analysis
tool with OPC interface
• Flexible display and scale
options
• Multiple chart instances offers
a variety of trend displays
open at the same time
• “Smart” gridline controls
allow even, graduated spacing
and color selection
System requirements
• One of the following Microsoft
operating systems:
– Microsoft Windows Vista
Service Pack 2
– Microsoft Windows 7
Service Pack 1
– Microsoft Windows 8
(excluding Windows RT)
– Microsoft Windows Server
2003 Service Pack 2
– Microsoft Windows Server
2008 Service Pack 2
– Microsoft Windows Server
2008 R2 Service Pack 1
– Microsoft Windows Server
2012
• Processor: 1 GHz or greater
• Memory: 8 GB recommended
• Disk space: 3 GB
recommended
• Application size: 432 MB
Fluke DAQ 6.0 Lite
Fluke DAQ 6.0 Lite (2680A-
APSW/L) is a basic configu-
ration, scanning and data file
creation package that is based
on the same easy-to-use menu
system and user interface as the
full Fluke DAQ 6.0 version. This
version communicates to one
Fluke data acquisition product
at a time using USB or LAN to
collect your data to a CSV data
file for easy post processing. For
easy setup, data collection over
LAN or USB and simple viewing
of channel data, this program is
a no-frills get-it-done data col-
lection package. Trending, web
service, OPC, automated email
alarms and alarm page acknowl-
edgement are not available in
this Lite version.
Ordering information
Model
2680A-APSW Fluke DAQ 6.0 Application
Software
2680A-APSW/L Fluke DAQ 6.0 Lite-Basic Data
Collection Software
2680A-APSW/LU Upgrade from Lite to full
Version V6.0
2680A-APSW/U Upgrade from V5 or below
2680A-904 Trend Link V 10 Advanced
Trending Software
2680A-904/U Upgrade from 6.1 or below to
Trend Link V10
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2007-2014 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 11/2014 2806282c_en
Pub-ID 13043-eng Rev 01
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.
®