Datasheet

2 Fluke Calibration P5500 Series hydraulic and pneumatic comparison test pumps, media separators and accessories
Pneumatic comparison test pumps
Model P5510-2M Model P5513-20M
Pressure range 0 psi to 300 psi (2 MPa) 0 psi to 3,000 psi (21 MPa)
Vacuum range 0 in to 27 in Hg (915 mbar 90% vacuum)
Test port adapters M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP
(plus 1 additional 1/4 NPT adapter)
M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP
(plus 1 additional 1/4 NPT adapter)
Weight 3.5 kg (7.5 lb) 8 kg (17 lb)
Dimensions (W x D x H) 240 mm x 330 mm x 180 mm (9.5 in x 13 in x 7 in) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in)
Gas supply connection 1/4 NPT female
These pneumatic comparison test pumps are designed for testing pressure measuring instruments
against master test instruments. These cost effective instruments provide precise control for impor-
tant calibration requirements and include many features found in our popular line of pneumatic
deadweight testers.
Pneumatic comparison test pumps
Model P5510
• Dual pressure/
vacuum capability
• Bench mount design
• Built-in handpump
as pressure/vacuum
source
• High quality needle
valve for fine control
• Test port adapt-
ers which require
no PTFE tape or
wrenches
Model P5513
• High pressure
pneumatic
operation
• Screw press for
fine pressure
adjustments
• High quality
needle valves
for fine control
• Test port
adapters which
require no PTFE tape or wrenches
• Sturdy carrying case with lid
Note: P5513 requires a pressure source, such as a nitrogen bottle, for operation.
2700G Reference
Pressure Gauge
• Provides best-in-
class 0.02% FS
accuracy
• Available in ranges
up to 10,000 psi
(70 MPa)
• Can be used with
P5500 Series Com-
parison Test Pumps
for a complete pressure calibration solution
Note: Detailed product information about the 2700G, including a product data
sheet, is available on the Fluke Calibration website at www.flukecal.com/2700G.