Instructions

used for communicating with a computer, printer, or other equipment. The
Thermo-Hygrometer includes a serial (RS-232) port, 802.15.4 (ZigBee) wire
-
less (optional), and Ethernet LAN port. To edit the settings for a specific port it
must first be selected. The selections are SERIAL, RF, LAN, and ERRORS.
The ERRORS setting allows the user to view any error messages stored in the
error queue. Once an error has been viewed, it is removed from the error queue.
The lr buttons are used to change the parameter setting. Press the Enter
button to save the new setting. Press the Exit button to cancel any changes and
exit to the menu.
7.5.3.1 Serial
The serial port can be used to receive and respond to commands from a remote
1620A “DewK” Thermo-hygrometer
User’s Guide
60
Figure 42 Comm Setting