Instructions

An optional extension cable may be used to allow the sensor to be placed in a
remote location.
5.4 Left Side Panel
The left side panel consists of, from top to bottom, the RS-232 port, Ethernet
LAN port, alarm port, and DC power socket.
RS-232 Port - The RS-232 port can be used to connect the instrument to a com
-
puter and remotely control and retrieve data from the instrument using a serial
RS-232 interface (see Sections 7.5.3.1 and 8). The jack accepts a 3.5 mm min
-
iature stereo plug.
LAN Port - This RJ45 socket allows the instrument to be connected to an
Ethernet IP computer network to remotely control and retrieve data from the in
-
strument (see Sections 7.5.3.3 and 8). The port has two LED indicators. The
15
5 Parts and Controls
Left Side Panel
Figure 3 Right and Left Side View